|
Motherboard SATA/pin PWM hub FAN HUB computer temperature control speed control board chassis four-wMotherboard SATA/pin PWM hub FAN HUB computer temperature control speed control board chassis four-wire fan controller |
1: Extend the 10-pin fan 4-pin connector to solve the problem of insufficient motherboard interface and centralized processing of fan wires.
2: The pwm interface is connected to the motherboard cpu_fan interface, and the red is the cpu fan dedicated interface (with speed measurement function). The black interface is the pwm regular fan interface (no speed measurement, but does not affect the pwm function). Note: Avoid speed chaos, computer crash, multi-channel interface extended by one interface, only show the speed of one of the fans! ! !
3: The power supply can be directly powered by the power supply, which can reduce the load pressure of the motherboard. The temperature control line PWM is separately connected from the main board, and the power supply and temperature control are correct.
4: Use range: Suitable for 12V motherboard 4pin/4pin fan. [3pin fan can also be used, but the plug is full speed operation, because the 3pin fan has no pwm speed control function]
5: 3M adhesive on the back of the hub PCB board, easy to paste in a flat place. Also has a fixed boring hole (the product comes with a pwm temperature control cable 40CM long)
6: Maximum current support, single channel must not exceed 1A, and the sum of 10 channels must not exceed 10A. [The current is too large for the hub to withstand]
7: This product is a hub. The function is to expand the single motherboard four-pin port into multiple ports. If your fan is a 3-pin fan, you can plug it in, but you cannot achieve PWM control speed!
Thermo Electronic Technology Co.,Ltd.
Address:Rooms 1318-19, 13/F,Hollywood Plaza,610 Nathan Road, Mongkok,Kowloon, Hong Kong
Website:http://www.thermoelectronic.com
Tel:00852-27108200 ext 82137
Fax:00852-27108266
E-mail:sales@thermoelectronic.com